portable Sparrows locksport kit

This is my take on a portable all in one kit for the Sparrows cutaway practice lock and reload kit. Plastic baggies in my house just don't last so I wanted something a little more durable to house everything. The goal was to have a compact(ish) all in one station for all my tools,pins and springs, etc that I would need to pin up my Sparrows practice lock in one secure location that would stand up to a few bumps and bruises. There is a M3 bolt that goes through the top 4 trays (the pinning tray, pins and springs tray, and the reload kit key trays) that lock them into place and prevents them from coming out. Print settings aren't critical. I used a .6 nozzle and .3 layer height. Use whatever you feel comfortable with. Hardware is M3 x80mm although you might want to upsize to M4 for the main 2 bolts that hold the thing together for a little better stability, your call. I've also included a blank blade if you want to make a custom blade for your set and also no text versions of all the blades for a smoother look. There is also a set of pinning tweezers and Sparrow follower tool in there for a "turnkey" (no pun intended) solution.

Print Settings

Printer Brand:

Anycubic

Printer:

Large Size Chiron

Rafts:

No

Supports:

No

Resolution:

.3

Infill:

20

Filament: IIID Max, TTYT 3D, Zyltech PLA+ Key Lime, Black Silk, Mystic Purple, Ceramic White

Notes:

I used the following

.3 LH

35mm/s (I haven't braced my Chiron yet)

20% Gyroid

3 perimeters

Main M3 bolts holding it all together are M3 x 80 but they do stick up a few MM proud at the top.