Gas L96 - Well G96 Project (Front rail and 14ccw adapter)

Hello there,

As i really liked my SRS i have tried my luck with Gas Sniper, a classic, WELL G96 (ARES AW338 Compatible) which have some non-standard solutions for todays airsoft standards.

First model which i have designed is simple 14ccw adapter which allows standard silencers / suppressors/tracers and make real difference in sound almost completly eliminating expanding gas (shooting sound / depending on the silencer used) leaving just trigger and hammer click sound. Just unscrew stock muzzle brake with non-standard thread and put adapter in it's place. This is not adapter to screw onto the end of the muzzlebrake. You should be able to fit any inner barrel through this. 

Update 02.02.2023:
Added front rail mounted on front sling mount points (M3 screw goes through). Allows to mount accessories on sides and additional part (top rail) lets You mount on top of the barrel.
It allows to use front L96 Rail. Hopefully it will fit any L96 also let any front L96 rail.
 

Rail installation:
After printing the base (1) put M3 nuts and put them in the holdes from the side of the barrel. Then gently push it into position as it should clip-on the rifle's body. Then put top rail part (2) on top and use M3 screws to scew both parts together, then print rail inserts (3) one as it is (right) and one mirrored (left), they prevent the rail from breaking from too much pressure  and lock the rail on the rifle so You don't have to use M3 screws to clip rail on the rifle. You just put any PEQ or accessories and it's all locked :) 

let me know what You think and maybe i'll share f3d file.

Prefered to use with my other project- modular over-barel silencer ;)

Next MileStone: Better Hop-Up regulation (to put on top rail, no tools will be needed, just standard, longer screw)
Next idea: L115A3-like scope mount (top scope rail)