Radiator laundry / washing drying rack repair bracket.

Simple print for rapairing a radiator drying rack (designed for drying racks with bars of 5mm diameter, but have also used on larger racks).

Printing instructions… Use a filament that has a certain ability to resist temperature (i.e. PETG or ABS). I personally used PETG.

Requirements… 

• 2x M3 x 14mm bolts,
• 2x M3 nylock nut.

Finishing… You may need to drill out the bolt holes as they may be a bit tight. 3.2mm drill is perfect.