Lighthouse

UPDATE 05/02-2023:

Now with hollow houses to fit a simple 2xAA batteri case and a on/off switch next to the window. In this way all the wirings can be hidden inside!
For that, as it still is a WIP - I only attached the gcode file.

@Kijai did a fantastic looking model of a lighthouse and then @Jeff made it better by separating in multiple pieces. But yet, something was missing….

So I made a hole in the middle to fit a 3V LED-cell and some wiring to make this lighthouse actually be a lighthouse.

Thanks @Jeff for the exploded pictures with the parts you've created. Made it easy to show where the LED-cell should be attached.

I've separated the STLs into three. One to be printed in white, another in red and lastly in black. Then just fit the pegs into the holes of each part and glue them togheter.

The file name shows which color to be printed in… but in Swedish so here comes a translation of the colors:

vit = white
röd = red
svart = black

If you print with the sizing I've thrown into the STLs your finished lighthouse will be 20cm tall and the base is 8cm by 8cm approximately.

I printed every piece without support nor brim.

Have fun!