Works well.
Bambu Lab X1 Filament Waste Bin - Narrow
Remixed to narrow the depth to 100mm, so it fits behind the printer when pushed up against the wall with the external…
42
1011
3
4022
updated
September 29, 2024
Makes
Comments
@SFDUFF glad you like it. Happy printing.
Thanks for your work and sharing .f3d file. It make adjustment for magnets in my stock easier, plus I learned something new in fusion360 from modification history :)
@msatbsx great to hear the file helped. I always thought it would improve remix culture if we share our source files or at least step files, which are easier to edit than STLs.
What size did you make the magnet holes?
@MickeyOlsberg_155781 I didn’t change the size, but the original creator said he used 6x3mm magnets. I had 5x3mm magnets already, so I just glued those in place.
Hi, the design can be improved. Holes on bottom - what is the point? Causes poor adhesion in corners and warping when printed without brim. If printed with brim then hard get rid of it due to chamfer. Also thick bottom which uses infill for few layers… corners have bad radia combination causing to have 3 layers in corners while the sides have only 2 increasing print tinder for no reason.
@Jiri_603192 The original designer put holes on the bottom, so rubber or felt inserts could be placed to reduce slipping and vibration. I used felt with mine and had good results.
I didn't have any issues with warping and I printed without a brim, but did use some supports.
Here is what it looks like mounted to the printer with a couple magnets.
No rattles or issues as the printer runs or calibrates. Still holds a fair amount of purge material. (edited)
