Anet A8 mainboard case with door

A case for the Anet A8 motherboard with door for easy access.

Use a piece of 1.75mm fillament for the hinge, but don't cut it too short, to be able to pull it out if necessary.

To open the door, move the z-axis upwards, otherwise it will be blocked by the x-axis motor.

If you can't move the axis and have to open the door, just pull out the hinge pin.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Clone

Supports:

No

Resolution:

0.2

Infill:

100