LED Grow Lamp Holders for Hydroponics Tower

I originally added the LED arms and lights to my 5 gallon bucket with lid from here but they were really floppy.

So I mixed the LED holder with the half spacer with no turn that I remixed from here.  To get the lights far enough away from the plants, I extended the arms 80mm.  I also tweaked the end of the arm slightly to rest all the way down on the body of the half for a bit more structure.

To assemble this, you need to print

• 1 half with light support
• 3 long arms
• 3 LED_Holder_Tip from here

You'll need 9x #8-32 x 1-1/2 in. machine screws & nuts to attach the arms to the half and the tips to the arms.

I used these LED lights as recommended from the original design on thingiverse.

I used these settings:

• half - about 2 hours at regular speed on my Bambu Lab X1C
  • critical supports only (so just the 6 little “legs” that stick out)
  • 3 or more walls
  • 30% infill
  • 0.2mm
  • no brim (although you may want a brim)
• long arms - about 4 hours each at regular speed on my Bambu Lab X1C
  • no supports
  • 3 walls
  • 50% infill
  • 0.2mm
• LED Holder Tip (don't remember print time)
  • orient vertically (to preserve the cleanness/dimensions to fit the LED lights)
  • supports are needed
  • 30% infill
  • 0.2mm

I did this quickly in Tinkercad so it's not perfect, but function over form :)