StarKnob - knob with M3 to M10 integrated nut

Printed with PETG 0.2mm layer height, 30% infill.

In the folder knob by size : all knob from each size is on the plate and the print stop to insert the nut is preseted.

In the folder Individual knob : Every file is sort by size for the first number (from M3 to M10) and by diameter for the second number (from 16 to 50 depending on the size)

You need to stop the print to insert the nut inside (if you use the M3.3mf to M10.3mf file the stop is integrated in prusaslicer).

You need to push the support by passing a screw threw the knob to break the 0.2mm support layer. 

Enjoy ! :)