Z-tops with light bar for Bear frame

Z-tops with integrated light bar support.

This version fits the Bear frame.

Click here for version that fits stock MK3 frame:
https://www.prusaprinters.org/prints/3244-z-tops-with-integrated-light-bar-supports

Print instructions

.20 layers
any material

Trim away in-built supports after printing.

I used a piece of wood with 2x 12V LED strips glued on, wired in series, and powered with the 24V from the printer PSU.

Wood dimensions: .375 x .625 x 13 inches. That's right, inches. Inches are for woodworking, mm's are for 3D printing. ;-)

Here is a LED strip that will work:
https://www.amazon.com/gp/product/B00HSF65MC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Print without supports in any material. There are a few inbuilt supports that you will need to cut away with a knife after printing.