Really nice Case, fits the Screwdriver very well, combined it with an Insert to accommodate the Extension.
LTT Screwdriver Rugged Case
Rugged case for the LTT Screwdriver and 60 bits!
146
542
10
4337
updated
February 3, 2023
Makes
Comments
Very nice box. I uploaded a Remix of the lid for a 1mm deep logo for multicolor printers that adds the circle around the logo, + an additional one as optional contrast layer. I´ve also added a modified top insert in the Remix to hold the official shaft extension with three more 8x3mm magnets.
Case printed in PETG and inserts/gasket in TPU.
Printed the seal in TPU, wound up being a hair longer and bunched up a bit. Looks like scaling on the length axis to 99% (or by ~2mm) seemed to do the trick. (edited)
How long the bits you guys are using? Tryed to order 3rd party ones, thought it would work with the standard 2.5cm long ones. it doesnt:( it would only work if the bits positions would be offset so it doesnt hit each other when closing the lid
@mrfr34ky_3443711 All LTT bits are half sized ones, so "standard" bits will stick out significantly further (and not fit this case).
@DrewPrice Thank you for getting back to me so quickly! Yes i see it doesnt close :D damn! Any chance getting either inserts remixed with the bits offset? I would do it myself but just got started with cad so this is waaaay beyond me (for now)
View 2 more comments
Printed in PETG and PLA. Great fit, protects the screwdriver and stores all the extra bit I don't always need.
What printer does this fit on? Can't get it to fit on a 220x220...
@SicSikNasty_1694692 cut the model into smaller parts and glue/plasticweld them together, or maybe try rotating the model 45 degrees
Great print!
Mine is sunlu TPU for the liner (gyroid infil makes for a soft part). The exterior is Bambu Labs matte orange and the clips are clear PETG.
Went together very easily and would recommend.
I really like this case. I liked the suggestion to print the insert in TPU. I happened to already have orange TPU so it got me to fi ally tune my tpu profile more.
Print was easy with a tuned tpu profile. Assembly was easy. I didn't have much problem with the magnets. They did try to jump out sometimes, but I'd put a few in then just put a piece of tape over them to keep them from leaping out until I was done and could glue the whole insert in place.
I liked the logo on the lid, but don't have a MMU, so I edited the file to cut out the logo. I had to scale the orange logo pieces down a bit to fit inside, but when I did I just glued them in and it looks great. I'll see about uploading those edited files soon for anyone who wants to do the same.
@Systrill - I'd love to see the logo file uploaded as a remix since I don't have an MMU either. Thanks!
This case is perfect to hold all my bits and the driver. No longer have to worry whether I grabbed the right bits, just take this case with me! Very sturdy, and holds the bits very well with magnets.
