CultureFPV LowCult / HighCult Action 2 Mount (with TBS ND)

A multi-part DJI Action 2 mount for the lowcult and highcult fpv frames.

All credit to t4obrien for the core case design, and providing source files for easy edits :)

For ease of printing, this case uses a locking piece at the rear that slots through the top plate in lieu of the rear standoff screws. See images for how it goes together.

Two options, one for use with TBS/CameraButter ND filters and one without.

Hardware

• 1x m3x6 or 8mm BHCS
• 1x m3 hex nut
• 1x m3 washer
   

Print Settings

Main Case

• Material - TPU
• Supports - Yes
• Layer Height - 0.2mm
• Infill - Any, I run 13% to reduce weight

Back Glass Protector

• Material - ABS, PETG, or PLA
• Supports - No
• Layer Height - 0.2mm
• Infill - 100%

Lock

• Material - ABS, PETG or PLA
• Supports - Yes, for hex nut cavity
• Layer Height - 0.2mm
• Infill - 75% or above.

STL files are pre-orientated for printing, otherwise as pictured if using 3mf.