Desiccant Box Top Opening

Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom

This is the second version of this box. I changed this version to open at the top to allow it to be filled more than 50%.

This is the description from the first version:
This is a container designed to hold 3-5 mm desiccant beads.

This is modeled after a dehumidifier that I bought that was supposed to regenerate in six to twelve hours when plugged into power. I quickly found that it wasn't properly regenerating in a week. So I designed my own box to hold the same amount of beads and planned to regenerate them in the oven.

This version is designed to open along the long axis the same as the purchased part, when I disassembled it.

I eventually realized that this limited the amount of beads it could hold by half (of course), so I redesigned it in my next version.

If you want to see my version 3 see here - https://www.thingiverse.com/thing:3930740

Print instructions

Category: Containers Summary

Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom

This is the second version of this box. I changed this version to open at the top to allow it to be filled more than 50%.

This is the description from the first version:
This is a container designed to hold 3-5 mm desiccant beads.

This is modeled after a dehumidifier that I bought that was supposed to regenerate in six to twelve hours when plugged into power. I quickly found that it wasn't properly regenerating in a week. So I designed my own box to hold the same amount of beads and planned to regenerate them in the oven.

This version is designed to open along the long axis the same as the purchased part, when I disassembled it.

I eventually realized that this limited the amount of beads it could hold by half (of course), so I redesigned it in my next version.

If you want to see my version 3 see here - https://www.thingiverse.com/thing:3930740

Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20%

Filament: Prusa PETG Transparent
Notes:

Material and color are not important, but I prefer to use Transparent filament to make monitoring the condition of the beads much easier.
The beads that I buy come Blue and change to a light pink as they get saturated.

There is not need for supports.

Post-Printing

Assembly

The printed parts need assembly. I prefer to use tie wire that I have on hand. The hinge simply needs to be aligned and a wire or similar material threaded through.
The hole is 2mm