Tool Stand for Prusa I3 Mk3 Tools

Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom

I designed this tool holder to mount on the tools that came supplied with my original Mk3 so that the tools are on hand when I need them and not cluttering the work space.
I did add extra spaces for my needle file set a pair of side cutters and tweezers
It connects into the hex holes in the top Z-axis brackets. The connection idea was noted from multiple sources using a similar concept.

Connects and holds with no screws or glue.

I used the print for testing the connection (just the connection part) to hold a small box of wipes on the other side the box was screwed to the mount through the hex section. Just make sure that the screw does not interfere with z-axis travel. The main holder is right side mounted to avoid the motor on the left.

Print instructions

Unassociated tags: Original tools, Tool Holder

Category: Tool Holders & Boxes Summary

Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom

I designed this tool holder to mount on the tools that came supplied with my original Mk3 so that the tools are on hand when I need them and not cluttering the work space.
I did add extra spaces for my needle file set a pair of side cutters and tweezers
It connects into the hex holes in the top Z-axis brackets. The connection idea was noted from multiple sources using a similar concept.

Connects and holds with no screws or glue.

I used the print for testing the connection (just the connection part) to hold a small box of wipes on the other side the box was screwed to the mount through the hex section. Just make sure that the screw does not interfere with z-axis travel. The main holder is right side mounted to avoid the motor on the left.

Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20%