Magnetic Cable Holder

This holder consists of 2 pieces.
The female piece will/can be fixed to a surface with double sided tape.
The male piece is supposed to be ziptied to the cable.

You can of course just use/print the male piece, if you have a surface you can use magnets an anyway.

Printsettings:
0.20mm Layerheight
No Supports

used 3rd-party material
Magnets: 5mm Diameter, 2.75mm Height
Zipties: 1.8mm Width, 0.9mm Thickness

Tinkercad project - If you want to make adjustments/create remixes … have fun. 😂
(gotta ungroup the pieces to see what's going on)