Next Gen Enclosure Magnetic PTFE Tube Mount

Remix of Line Arc Line's “Join PTFE Tubes Together Magnetically!” and another one of my remixes “Printed Solid Next Gen Enclosure Tool Hooks” to continue enhance my Printed Solid Next Gen Enclosure.  This compliments with my “Magnetic PTFE Joiner for Next Gen Enclosure” enclosure mod.  

I feed my filament from on top of the enclosure, and I wanted to have the mount feed from my dryer or from a spool into the enclosure.  

These were designed to work with my Printed Solid NEXT GEN SAFETY ENCLOSURE FOR PRUSA MINI 

Remix Details:

I took the tool mount remix and extended it for connecting with the magnet PTFE connectors.  It's pretty simple.  I also added a notch out for which clears the enclosure bolts.  

Additional Parts:

For assembly you will need six 5x5mm magnets.  I purchased these, but I am sure you can get these from any vendor: https://a.co/d/d00XiL3 

Print instructions:

• I printed mine with Protopasta Back-to-basics Natural PLA
• For best printing, rotate the model to have the flat side down and add supports for the overhang.  I just used paint on support (using triangle, which is 2 to select)
  • See photo for recommended print orientation.
• I used 3 perimeters when printing.

Change Log:

1. Posted initial Remix files - aka Version 1

Additional Notes:

• Constructive feedback is welcome.  How can do improve the remix (tolerances too tight?)
  • fix orientation.
  • Add gcode with supports.
  • Anything else to add to a future change list?
• Looking for additional models for a Printed Solid Enclosure?
  •  Checkout my collection:  https://www.printables.com/social/217988-cshorey/collections/401539
    • drop me a comment if I should add something new to the collection.