Cheese MTG EDH Deck Box

A pretty simple deck box designed to hold a double sleeved commander deck.

The two halves snap together using little studs on each half.

There is a 0.3mm gap between the two halves, if that is too tight for your printer some sanding may be needed. (Or you can download the original design and adjust the ‘Tolerance’ parameter).

The entire design is made parametrically. Feel free to download and adjust any dimensions you need to.

Update - 11/02/2023

I increased the tolerance to 0.3mm from 0.2mm
I decreased the snap stud heights to 0.5mm
I increased the snap X offsets so the studs are more central and can flex a little easier