I created two rod tensioners to fix my fishing rods. There are various others, this one can also be used for other applications. The rope just needs to be made longer.
- Print out the 3d models I used PLA.
- the top and bottom must be connected with a good superglue do not forget the gear wheel must be inserted
- The protective pads for the blank are printed in TPU and glued to the top and bottom with superglue.
- The finish button is printed with fuzzy skin outer walls thickness 0.15 and dot pitch 0.2 so the touch is better
- To fix the tension cord, I designed an adapter for the end button so that we held the tension cord against pulling out. The ends of the tensioning cord are additionally glued into the adapter with some superglue.
I use a 4 mm elastic cord as a tension cord.
There is another smaller version, check my models!
The author marked this model as their own original creation.