Anti-Sound P1P Enclosure

Is there an easy way to have the door open from the left? I can go in and modify things if necessary, but I'd rather not.

Bonsoir, j'avais une petite question, j'ai acheté des panneaux acoustiques, dans quel sens faut il les mètres, la mousse vers l'intérieur ou vers l'extérieur? du coup les panneaux blanc il faudrait que je les peigne en noir si je veux avoir le coloris noirs vers l'extérieur non?
désolé si ma question est bête mais je préfère m'assurer de mettre dans le bon sens les panneaux acoustique afin qu'il soit le plus efficace possible

this has been the second thing on the buildplate about two years ago, and rightfully so!

still consider this cooler than official p1s upgrades.

did another backplate though: https://www.printables.com/model/1393983-lid-opener-and-backplate-for-p1p-enclosure

https://a.co/d/1wIU86D
panels ^^^ (edited)

Any chance you have a a Top Rear panel and Backplate A& B flush with the backside?

White and orange PETG printed pretty well. Some joints are too tight, and several broke when trying to join, requiring reprints and some knife action on the male tennons to get things together. The lid has a bit of slop to it but it seems sturdy enough to hold an AMS. Overall very nice. I'm going to swap the door and probably top with the transparent remix using acrylic, and then I'll call it done.

Hello, I have been interested in making this model for a while. However, I can’t seem to find instructions. I am very confused on how to put it together and everything I would need

Would this be compatible with a P1S ? Really need to reduce the noise at all costs. Thank you (edited)

Thanks for the STEP files OP. I modified a bunch of stuff, mostly for better fitment for a fuzzy skin print and panel gaps. Looks better than I hoped, even though I went through 4kg of filament (accidentally) prototyping things out. Luckily, PETG is like $9/kg so it wasn't too terrible.

I'm guessing a few people have used the cheaper BXI panels from Amazon? Has anybody noticed they barely stop any noise? Is there a better option that isn't $60+?

How does one print the top and bottom frame for the door in one piece? It is too big for the P1P print area, curious how the majority of people here have it printed all as one piece...

where can i get the grey fibre board for the door?

Made with Bambulab Matte PLA (edited)