Print-in-Place Ford Bronco 2021

This model of the iconic Bronco has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate.

The only thing you have to do after printing is to snip off a few tiny pillars that prevent the axle casings from fusing with the wheel axles during printing and you are ready to conquer the badlands!

This model is best printed at 100% scale, however, anything down to 60% scale works just fine. 

Despite the limitations of designing a vehicle with interior and working suspension and wheel mechanisms, I was able to preserve all the differentiating and iconic features of the vehicle. Some long bridges could become a problem if you decide to scale the model up, but otherwise, it's a pretty easy model to print. However, if you have issues printing any of my designs, DM me on Instagram (https://www.instagram.com/vit.budina/) and I will send you my Cura profile.

Enjoy! :D

Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.