I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a.
Assembly Instructions:
This was designed to be assembled with 30mm M3 screws with 5.5mm nuts.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
GRID or CUBIC SUBDIVISION
25%
Filament material:
PLA Pro
Notes:
Perimeters: 3
Bottom Layers: 5
Top Layers: 5
Speed: 60mm/s
Bed Temperature: 40C
Extruder Temperature: 210C
Part Cooling: 100% after layer 1
The author remixed this model.