i designed my own tolerance test since all the models that i found use either too much material or time. “push in” tests can't fuse so they aren't realistic enough for print in place models.
since the model is relatively tiny, i had to use a code instead of numbers; one square is equal to 1/20 mm (0.05) and one slot 1/10 mm (0.1) (not centered, that slot is for a screwdriver).
there is a rectangular slot for a flat headed screwdriver in the middle to help you remove/twist the pins. the pins are straight.
this is my first iteration so there might be issues with the model that i will eventually fix if needed, please make me know if you spot any
made in fusion 360 for personal use
if for whatever reason you would want to sell this model, feel free to do so without asking me
The author marked this model as their own original creation.