Creality CR-100 alternate Spoolholder

Remodeled the original CR-100 spoolholder to accept larger diameter spools. Print with support and the smaller part pointing down. Use enough shells and infill so the link between both parts is strong enough (small connecting area!). The slopes on the large part to hold the spool in place don't need support.

I suggest to print 4 of the m3 standoffs aswell and move the whole extruder assembly ~5mm outwards so the filament doesn't rub against the spool wall under tension. See last picture.

Print instructions

Category: 3D Printer Parts Summary

Remodeled the original CR-100 spoolholder to accept larger diameter spools. Print with support and the smaller part pointing down. Use enough shells and infill so the link between both parts is strong enough (small connecting area!). The slopes on the large part to hold the spool in place don't need support.

I suggest to print 4 of the m3 standoffs aswell and move the whole extruder assembly ~5mm outwards so the filament doesn't rub against the spool wall under tension. See last picture.

Print Settings

Printer Brand: XYZprinting

Printer: da Vinci Jr. 1.0 Pro

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2mm

Infill: 35%, 3-4 shells

Filament: DAS FILAMENT PLA weiss matt / schwarz matt (white / black mat)