Africa Hand Stamp

This stamp was created for a Girl Scout event my wife was part of. Full disclosure - the stamp itself is completely my design - the handle is not. I used the file from Printables made by Priuxls (https://www.printables.com/model/188160-stamp). The photo is illustrative only as the assembled stamp. Also the ink pad we used was on its last legs so the actual stamp will not have the gaps in the photo. The stamp itself was made using Matterhackers TPU with adjusted settings in Prusa slicer to a maximum speed of 25mm/s for all speed categories, no crossing of borders permitted, no retractions allowed and no fan. The nozzle temp was set to 230C. I have included all CAD files, Slicer file and gcode. I would also look at the gcode after slicing as the continent had a bubbling effect I believe due to trapped air in the infill. It was fine for our usage - however if you do not desire that effect I think solid layers would solve the issue. The text required some stringing cleanup with an exacto knife. I welcome any input and can't wait to see if there are any remakes.