Flachkabel durch Fensterrahmen – Adapter
Dieses Modell dient dazu ein Flachkabel durch ein Fenster-/Tür-Rahmen durchzuführen,ohne ein Loch durch den Fensterrahmen zu bohren, ideal für Bewohner die zur Miete wohnen.
In meinem Fall ist das so das ich einen Helium-Miner betreibe, die Antenne steht außerhalb der Wohnung (Draußen) und der Miner selbst steht geschützt vor Witterung in der Wohnung neben meiner Telefonanlage. Dieses Model kann auch dafür dienen wenn
man ein flaches LAN-Kabel nach Draußen haben möchte. Durch das immer wieder öffnen und schließen des Fenster / Tür könnte das Flachkabel auf Dauer gequetscht und Schaden nehmen wenn es verrutscht.
Wie man auf den Bildern zu erkennen ist, ist der Adapter außerhalb mit 2x 6mm Schrauben ins Mauerwerk befestigt und der innere Adapter ist mit doppelseitigem Spiegelklebeband an der Tapette fixiert (je nach Wunsch kann man diesen auch mit Schrauben ins Mauerwerk befestigt werden).
Die Nut (siehe Zeichnung "<=") ist Grosszügig gewählt, weil Fensterkitt oftmals großzügig mit dem Mauerwerk / Fenster / Tür montiert vorhanden ist, damit beim anbringen des Adapters nichts eingequetscht wird oder klappert.
-----.
This model is designed to feed a flat cable through a window/door frame without drilling a hole through the window frame, ideal for renters. In my case, I operate a helium miner, the antenna is outside the apartment (outside) and the miner itself is protected from the weather in the apartment next to my telephone system. This model can also be used if you want to have a flat LAN cable to the outside. By repeatedly opening and closing the window/door, the flat cable could be permanently crushed and damaged if it slips. As can be seen in the pictures, the adapter is attached to the outside with 2x 6mm screws in the masonry and the inner adapter is attached to the wallpaper with double-sided mirror adhesive tape (if desired, this can also be attached to the masonry with screws). The groove (see drawing "<=") is chosen generously, because window putty is often generously mounted with the masonry / window / door so that nothing is squeezed or rattles when attaching the adapter. I printed the material out of PETg because of its weather resistance (UV light).
The author marked this model as their own original creation.