Lower dash vents for Land Rover Series III

This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.

But with the magic of 3D Printing you can just print your own.

Print instructions

Unassociated tags: Series ii, Series III

Category: Automotive Summary

This is a lower dash airvent for my old mans LandRover, The earlier models used a "Nose" deisgn that was horrid and as such many enthusiasts have changed out to using the later model vents. Making these impossible to find.

But with the magic of 3D Printing you can just print your own.

Print Settings

Printer: OrdBot Hadron

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20%

Notes:

Print in ABS or ASA as PLA wont survive inside a vehicle.

Designed to be printed face down without supports.

How I Designed This

Designed in Fusion360 of a template photo and some measurements.

Special thanks go out to the "3D Printing Australia" group for kicking my brains 3d dimension back into gear