Bottle holder for Dacia Dokker

The mounting screw in the original bottle holder is unscrewed. 
The insert 1 is inserted into the center console. Make sure that the recess on the inside of the base points in the direction of travel (the insert is not symmetrical). Insert part 2 into the hole on the bottom and screw it tight. The hole can be closed with the conical plug 3 (simply press it in). The plug has a small hole at the top, where you can screw in a screw. This allows the plug to be removed again if the whole thing is to be dismantled again.

Print with PLA, 0,3 mm layer height