Hadley telescope tripod mount (remix from Gyoenastaader)
Made this remix for the Skywatcher EQ2 tripod, with 1/4 thread. i’ve made a hole diameter 4, you can drill 5.1 and tap ¼ thread òr grab a ¼ thread insert and insert it using a heat gun.
Made 2 x diameter 10 holes extra if you like to drill both eq2 mount holes thru for extra clamping force.
I used 35% cubic infill and supports (see photos) but you can print it in any desired direction/without supports if you dare.
Would use 75% infill if i'd te make it again.
The author remixed this model.