Fabrikator mini v2 extruder for flexible filaments
Description
PDFThis extruder allows you to print flexible filament such as TPU (Ninjaflex etc.) with your Fabrikator mini v2.
Based on robin7331's extruder: https://www.thingiverse.com/thing:2030554.
Print Settings
Printer:
Fabrikator mini v2
Rafts:
Yes
Supports:
Yes
Resolution:
0.1–0.2 mm
Infill:
20–50 %
Notes:
• Print the base with support and raft.
• I used Das Filament PETG, works fine.
• I printed mine with 4 shells for sturdiness.
Post-Printing
You will need 2 new allen screws M4x10 for mounting to the printer case, also 1 allen M3x6 for the bearing on the arm. The long screw holding the arm can be used from the original.
3 allen M4x8 screws for mounting the stepper motor to the base are optional, the original ones should fit also.
See robin7331's instruction video for final assembly: https://www.youtube.com/watch?v=hxkDu6xdq5I
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.