Ender 3 V2 top rail front LED mount
Description
PDFDIMENSIONS: 140mm (5 1/2in) L / 20mm (13/16in) W / 14mm (9/16in)
I hate it when people don't list dimensions, pet peeve.
The size I listed isn't what I printed. My undercabinet lights came with 35mm double sided adhesive so I stretched the mount to 36mm so I had maximum sticky holding them.
Supports are only needed under one end where it slides into the framerail.
I wanted the top surface nice and smooth. Other wise, these will print on their sides.
Apologize for the light cord being In the way. I just wanted to power it on to get some pics.
They are flush with the top, and they slide for adjustability in the rail.
After hours of browsing, and downloading. I couldn't quite find one like what I wanted.
I wanted a front slide in mounted holder, but I really liked the design by xxMonkeyxx
So, a few hours in Tinkercad slicing and fitting, and I got exactly what I wanted.
I am moving the filament spool down to the rear right, so I can get my shelf setup, hence why I needed nothing mounted on the top.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/6u6AzLL1sdY
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
15%
Filament: Overture (of course) PLA White
Notes:
DIMENSIONS: 140mm (5 1/2in) L / 20mm (13/16in) W / 14mm (9/16in)
I hate it when people don't list dimensions, pet peeve.
I also printed this with 6mm nozzle @ 0.3mm layer height. Turned out amazing.
Tolerance is pretty tight, so if you get a little elephants foot on your initial layer, you'll need to scrape, grind or trim that back.
Post-Printing
Small tree supports you can see on the print bed
2nd test print to determine if I liked how it fit.
How I Designed This
What I started with
The original end, did not fit after a test print, so this is the only way I know how to change things
Tags
Model origin
The author remixed this model. Imported from Thingiverse.
