Plug for Onewheel GT40 Protective Cover

@rayyong did a great job creating the GT40 Protective Cover. But the low profile plug won't save the port if the GT40 is mounted over the top of the fender. So I learnt Tinkercad and created a high profile plug, with an additional cap on top of it.

To build this, first print "GT40Pow.stl" and "GT40Passive.stl" from @rayyong's models. And then print the 2 objects from my model. 

Recommended print settings:

• PLA (or stronger materials) with 6 wall loops, 4 top and bottom layers, 25% infill
• (Optional) Use a brim as the contact area is small

It's holding up pretty well against occasional rollovers. But I mostly ride on city sidewalks and paved trails.

It's my first model publish so let me what I can do better! :)