Was inspired by DesertStorm's LED light kit but I wanted a better mount for the USB switch on the outside of the Original Prusa Enclosure. The plate mounts to the existing holes under the door using M3 hardware and the USB switch mounts to the plate using zip ties. I routed the wires into the enclosure by the foot and powered it with a separate 5V power supply (to power both the LED lights, Raspberry Pi and circulating fan).
Hardware:
2x: M3n nuts
2x: M3x5 screws
2x: Zip ties
USB Switch - RIITOP-Extension-Switch-Support-Headset
The author marked this model as their own original creation.