Wyze Camera Stand

This is a solid block stand for a Wyze Cam v3
0m
1× print file
0.20 mm
0.40 mm
0.00 g
Creality Ender 3
13
120
0
790
updated February 1, 2023

Description

PDF

This is a stand for a Wyze Cam v3.  I bought this camera to watch my 3d prints as they are printing, and wanted to make a stand for the best viewing point.  I have an Creality Ender-3 S1, and found that the best way to watch the builds was from the same level as the build plate (I don't typically do very tall builds, more stuff on the plate. 

There are 2 versions of this Camera Stand

 

v1 is 6cm tall overall, and the camera will sit 5cm above the table it is set on.  There is a space in the back for the cord connecting to the camera can sit, if the camera is at it's lowest point. (This was my original design, I ended up printing v2 after making some updates.  I haven't printed this one yet, so let me know if you end up trying this one, how it turns out)

v2 is 7cm tall overall, and the camera will sit 6cm above the table it is set on.  There is a space in the back for the cord connecting to the camer can sit, if the camera is at it's lowest point.  There is also space at the bottom to hold the cord again, to help re-direct the cord and making it more stable.  (I would print that section with supports).

 

Both of the files might need to be moved around once in your slicer (I'm still figuring out how to use 3d design software and am not quite sure how to sit how I want to in the slicer sometimes).

This stand could be used for other cameras with similar size bases (5cm x 5cm x 1cm) but I haven't tested that out yet.

 

Let me know what you think, and if there could be any updates.  Thanks!

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more