Newton's Cradle frame and legs

This is the frame for a Newton's Cradle project for my daughter's physics class. We did it on the 3D printer instead of using popsicle sticks.

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 V2

Rafts:

No

Supports:

No

Resolution:

.3mm

Infill:

15%

Notes:

Print the frame, four (4) legs and four (4) bases.

The pieces should press-to-fit together. You may need a tiny bit of sanding to knock off the sharp corners on the legs before inserting into the frame and bases.

The materials (balls, wire, etc.) and instructions to complete the Newton's Cradle can be found elsewhere on the internet.

The Frame.stl model is spaced for 7/8 inch balls. The file Frame-1in.stl is spaced for 1 inch balls.