Drill bin and sorter

this box fits with a wire for a peg board  system.  Intended for sort and store drill bits.
The nice single holes boxes are nice but what hapens when you get several boxes with some missing eventually. 
there is a wedge area in the front of the box that helps sort what bin it goes in. It is also good for choosing a drill for a particular diameter.  Put the screw in the same wedge for sorting the drill.
There is a cover that you may choose to print, or not.
the main part is split into two parts to make it so almost no support is needed. Depending on your slicer settings it might be able to print without support, bridging the sorter slot.  

you Might choose to fill the text on the front with a pen. Or how I did it I mask leaving the front exposed and used spray paint to cover the front. Then sanded the front removing the front paint, leaving the paint in the text.