This is multi-wrench I made for my Rugged Obsidian 45 that includes a regular mount wrench, an end cap wrench, and a 3-lug mount wrench.
Print flat side down, no supports required.
I designed this in inch standard and that's how it exported, if your slicer assumes mm scale, you will have toSCALE TO 2540% for the wrench to print the right size.
I recommend 4 perimeters and 40% - 50% Gyroid infill for multi-directional strength.
*I don't know why Thingiverse is mangling my photos, but the proportions in the first one are the most accurate.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
40% - 50%
Filament:
Overture PLA+ and PETG
Notes:
Both PLA+ and PETG held adequate tolerance on this print in my i3 MK3s.
The author marked this model as their own original creation. Imported from Thingiverse.