Mastodon Logo Magnets

Designed for 12mmx3mm magnets like these: https://amzn.to/3Hgb2f5

USE 0.2 LAYER HEIGHT! Critically important, especially for the flush one. No supports needed. The STL's are already oriented for printing, do not change.

To print the raised one in two colors, insert a color change at 4.2mm height.

To print the flush one:

1. Print the Purple Logo first at 0.2 layer height
2. DO NOT REMOVE THE LOGO FROM THE PRINT BED
3. You may, however, want to clean up the logo - check for any purple strings outside the logo and carefully remove them, as they'll get embedded in the white and look bad (which you can actually see in the upper left of mine).
4. Print the White Background right over the Purple Logo, also at 0.2 layer height. Make sure you don't move things - the Logo and Background need to be printed in the exact same spot on the bed for this to work.
5. As long as your printer is well calibrated, it should come out nice and flush