watch stand

This watch stand for a galaxy watch charger. You can insert the charger from behind and secure it with a M4 screw and washer. There is a slit that allows you to press the wire in.
You may need to sand the inside a little to get it to fit snugly. If the wireless charger has it little gap it increases the power and warms up a little.  You want the charger and the watch contacting
I put a few feet on mine. To keep it from sliding around the desk.
https://www.amazon.com/gp/product/B08P25XYDG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
any feet will do. That is what I used.
Included is the STL file to print directly. Or the SolidWorks 2020 file so you can make changes.
A hint: because it is so light, without the watch. the cable moves it. a simple way to add weight is while printing, pause the print and pore some sand in the infill of the bottom. You might want to turn the fan off or low for a few layers or not fill it up to the current layer. The goal is not to fill the inside, only to give it some weight at the bottom.
Watch not included (LOL).