Weighted Solder Tip Cleaner

Weighted Solder Tip Cleaner

This Solder tip cleaner can be weighted with sand, nut bolts, screws or whatever you like to put in…

When you want to fill it with sand I strongly recommend to use the Separator Disc to prevent the fan spreads sand all around!

If you use other materials you may print it without disc, but I recommend it anyway to have a 100% clean print result also inside…

Printing instrictions

Print first just the Separator Disc

Material: PLA/PETG 

Layer high: 0.10mm

Infill: 15-20%

Supports: No

Then print Weighted Solder Tip Cleaner

Make a stop at Layer high 30,20mm. 

Fill in the weighting material and put on the Separator Disc. Take care the disc is placed completely flat!

Then continue printing.

Material: PLA/PETG 

Layer high: 0.20mm

Infill: 15-20%

Supports: No