Sonoff Zigbee 3.0 USB Dongle Plus Wall Mount

Wall mount for Sonoff Zigbee 3.0 USB Dongle Plus. 

I would advice printing regular version. With USB connected Dongle won't fall out even if there are some play. 

Printed it in PETG and PLA. PETG works great with regular version, but there was a bit of play with PLA, so I made a tighter one. 

• Total size: 68x30x17 mm 'ish
• Layer height: 0.2mm
• Infill: doesn't matter
• Prints vertically
• No supports needed