Light shade for T10 bulb on Loc Line

Lamp shade for a T10 LED bulb held in a rubber pre-wired harness connector mounted at the end of Loc-Line (aka "flex pipe") There are many T10 LED bulbs available online, I found (these)[https://www.amazon.com/gp/product/B00JRE38EA/) to be pretty decent. Supplies enough light to show what's printing in a dark room.

Has provision in the Loc Line end that you could run the wires through if you were so inclined.

I printed in Mika3D silk silver filament which works well enough, although as you can see it's not exactly opaque. Could get fancy and use aluminum foil if you wanted a better reflector.

Also pictures is my Loc Line camera mount for the Logitech C910 and a 1/4" NPT adapter for M5 screws which I used to mount these to my Prusa MK3S.

Print instructions

Category: 3D Printer Accessories Summary

Lamp shade for a T10 LED bulb held in a rubber pre-wired harness connector mounted at the end of Loc-Line (aka "flex pipe") There are many T10 LED bulbs available online, I found (these)[https://www.amazon.com/gp/product/B00JRE38EA/) to be pretty decent. Supplies enough light to show what's printing in a dark room.

Has provision in the Loc Line end that you could run the wires through if you were so inclined.

I printed in Mika3D silk silver filament which works well enough, although as you can see it's not exactly opaque. Could get fancy and use aluminum foil if you wanted a better reflector.

Also pictures is my Loc Line camera mount for the Logitech C910 and a 1/4" NPT adapter for M5 screws which I used to mount these to my Prusa MK3S.