Voron V0.2 Long Drag Chain Spacer with Nuts

I am building a Voron 0.2 based on the Fysetc V0.1 kit. The drag chain has got a new position for the V0.2, where the radius has been reduced in comparison to the V0.1 design. As a result the chain contained in my kit didn't work with the new position. For this I designed this longer spacer so that the included chain works (apart from that it is also better for the cables if the radius is larger).

The short M3 screws can be tightened with a 2 mm hex key through the holes in the heatset insert nuts. If you make the window backwards, it looks like a solid part from the front.

If you like my design, give it a Like and post a Make with rating. Thank you very much!