I initially started using the Articulating Raspberry PI Camera Mount (https://www.thingiverse.com/thing:3114849) on the Prusa MK3 mounted on the x-axis motor but didn't like the fact that I couldn't have the camera at a fix point. Since the original designer only has a mount for a 2020 extrusion I created my own for the 3030 aluminum extrusion on the Prusa i3 MK3. This should work on any other 3030 extrusion that has the same profile dimensions.
If your printer is assembled and you want an easy way out you can use drop-in T-nuts (I used https://www.thingiverse.com/thing:3199057) and use two M3x10 screws.
The author marked this model as their own original creation.