Raspberry Pi4 case for Prusa MK3S+ with DSI opening Shorted for LED Light Bar Mod

A Raspberry Pi4 case with a shortened and thinned mount arm to fit under LED Light Bar Mod. I found the original case was too high and interfered with the Light Bar mount. I made the mounting arm thinner and shorter and put a chamfer on the corner of the case near the Light Bar. 

I had also added mounts for a fan on the case but that didn't work out so I got the heat-sink that this case was originally designed for and instead of reprinting the piece I just cut out the modification which is why the edges around the fan look a little rough.

As stated in the comments, the 3mf file I provided is for a 0.6mm nozzle, so be sure to change it if you have a 0.4mm nozzle.

I included my gcode and 3mf files and also the step file for ease of remixing.