Gotek external case with top mounted OLED and Blackberry Trackball

I'm using my Gotek in an external case, so I wanted the screen to be on the top for better readability
0
14
0
218
updated January 28, 2023

Description

PDF

I'm using my Gotek in an external case, so I wanted the screen to be on the top for better readability, I also decided to switch to using the Blackberry style trackball so put that on top too,

With both of those up there and the trackball also replacing the LED, I decided to restyle the base to take away the OLED and LED holes that I wouldn't be using.

The holes for the Blackberry trackball are lined up for the board that I bought from eBay
https://www.ebay.co.uk/itm/275370428714
but I'm guessing most would be a similar size.

The OLED is sized for the 128x32 ones - which are a fairly standard size - it includes a small bracket to hold the oled in place.

It prints easy enough on my Eryone ER20 and that's a terrible printer so it should work for most people.

Tags



Model origin

The author remixed this model.

License