A simple coat rod holder for your wardrobe.
Pictured - 22.4mm inner diameter bracket for a 22mm wooden broom stick, I've made models for a few other diameters
Screw hole diameter: top of countersink is 9mm, hole is 4.5mm
Screw a bracket to each side, cut your rod to length, and snap into place.
I printed mine with PETG, 3 walls, 3 top, 3 bottom, 30% infill, 0.4mm nozzle and 0.2mm layer height.
Add a colour change for a little accent!
The author marked this model as their own original creation.