H0 1:87 scale bogie truck set

This bogie truk set is a complement for a project I started some time ago, but could only finish recently.
The set can also be used on other kinds of HO models as well.

This set consists on a frame with suspension details with two different hook sizes to be used on the HO 1:87 Scale Tank Car SHELL I created on the the falowing link:
https://www.prusaprinters.org/prints/20534-ho-187-scale-tank-car-shell

The wheels used were aquiered on Aliexpress on the link below:
https://pt.aliexpress.com/item/32820487835.html?spm=a2g0s.9042311.0.0.6215b90aKNoN5a

Print instructions

In order to get a good compromise between detail and print quallity I had to break the print in several parts that can be glued together.
Also to get some of the finest details a 0,25mm nozle was used, this was the only way I was able to get maximum details as possible.
All the parts were printed with 0.15mm layer height with Prusament PETG Jet Black, so there was no need to paint them.
The usage of brim on the smaller parts is higly recomended.