Tenon Marking Gage

For use with wood lathes. This is specifically designed for the OneWay and Robust style live centers and the Vicmarc standard and 125 jaws. 

I have a Vicmarc 120 with these two sizes of jaws. I am constantly ping ponging back and forth and got tired of messing with the dividers. So…….here we are. I have tested this quite a bit and it works well. Recommend PLA if shop is not too hot. PETG or ASA otherwise. 

To use, simply remove the gauge from the holder next to the lathe and slap it on the live center body. Note the OneWay body does not revolve, but the Robust does. Place the wing with the grooves on the tool rest. There are two sets of grooves, the inner set is of the tenon and mortise sizes of the standard jaws. The outer set is for the tenon and mortise for the 128 mm jaws. Choose the grove and place a pencil in the groove next to the wood. Violá, you have your size and can go on. 

Please share with friends, post a make, and follow me. I am shamelessly trying to get enough credit to get free filament. :0