2D models I printed for my nephew. I have included full models and split models for printing with one AMS.
Instructions for Bambu Studio below
- Textured PEI plate works best
- Paint your model
- Assemble (Ctrl+A then right click and assemble)
- Rotate 180 degrees on X axis
- You can split some of the items with lighter colors or you might see the black infill.
- I split the model for the yellow and red parts.
- Turn off elephant foot compensation if you have split any of the parts
- To split just right click then split, deselect the colors you want to split then assemble the rest of the model
- If you need separate parts these can be press fit in. 100% scale works for larger parts and for smaller items I recommend 97-99% scale
Printed with default settings except for elephants foot compensation turned off.
Tags
The author marked this model as their own original creation.