Steering Stem Nut Socket, Yamaha XV535

I needed a socket to tighten the steering stem nut of my Yamaha XV535 to the required torque.

I designed this socket which can be used with a smaller and a larger hex nut since I had to use two different torque wrenches. 

Printed with a large infill percentage the tool (printed in PETG) was stable enough to withstand the torque required without any visible damage.

I'm not sure about the settings I used to print the nut since it was a while ago but I used a very high infill value (the print weighs around 70g) and 5 shells.