Esee Izula Scales

Longer scales for the Esee Izula.  Working on textured scales, but printing at 0.20 layer height gives some pretty good texture, looks cool too.  You might try closer to 0.30 for more traction.  I printed the pictured scales to test fitment with 2 walls, tops and bottoms, and 20% cubic, seems to be pretty sturdy, I'd recommend at least 3 walls, top, bottom, if not a few more.  

The hardware used is M5 x 16mm.  The nut would use an 8mm wrench and is 4mm tall.